Erbauer ERB210C, Руководство пользователя

Страница: 15 / 20

ROUTER
Fig 22
2 Rate of feed
The cutter of your router rotates clockwise.
For more efficient cutting, move your router from
left to right as you stand facing the workpiece.
Note:
When cutting outside edges, move your
router anticlockwise and clockwise when cutting
inside edges.
MAINTENANCE
1 Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool.
2 Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
3 Always store your power tool in a dry place.
4 Keep the motor ventilation slots clean.
5 If you see some sparks flashing in the
ventilation slots, this is normal and will not
damage your power tool.
6 If the supply cord is damaged, it must be
replaced by a special cord or assembly available
from the manufacturer or its service agent.
TROUBLESHOOTING
1 If your router will not operate, check the power
at the mains plug.
2 If a fault can not be rectified return the drill to
an authorized dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.