Erbauer ERB180C, Руководство пользователя, Страница: 5 / 12

720W Tile Cutter
Additional Safety Rules for your Tile Cutter
1.Remove the mains plug from socket before carrying out any adjustment
servicing.
2.If the supply cord is damaged have it replaced by a qualified person.
3.Always wear both eye and ear protection when using the machine.
Ensure that the directional arrow marked on the blade corresponds with the
rotational direction of the motor.
4.With the machine disconnected from the power supply, rotate the blade by hand to
ensure it is free from obstruction.
5.Always keep the blade securing arbor and collars clean.
6.Ensure that the blade-securing bolt is securely tightened with a suitable wrench.
7.Never try to cut freehand. Always ensure that the tile to be cut is pressed firmly against
the parallel side fence.
8.Ensure that the work piece to be cut off has sufficient room to move sideways. Failure
to do so may result in the off cut binding against the blade.
9.Never cut more than one tile at a time.
10.Never cut pieces too small to be held securely against the side fence without leaving
enough space for the hand to be a safe distance from the blade.
11.Ensure that the table and surrounding area are clear with the exception of the tile to
be cut.
12.Never fit substandard blades to the machine. Only fit correctly sized diamond
blades.
13.Before cutting a tile piece let the saw blade run freely for a few seconds. If it makes
an unfamiliar sound or vibrate excessively switch it off immediately and disconnect
from the power supply. Investigate the cause or consult a qualified person for advice.
14.Let the blade reach full speed before commencing the cut.
15.Do not force the blade to cut the tile.
16.Let the blade come to a complete stop before removing any jammed or off cut
material from around the blade area.
17. Always use the appropriate safety equipment that is required for the product. e.g.
Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of
over 85 dbA), Gloves and face masks. In all cases ensure that the safety equipment is
in good condition.
SYMBOLS
Read the manual Warning Wear gloves
Wear dust mask,eye & ear protection