Erbauer ERB180C, Руководство пользователя, Страница: 4 / 12

instructions for lubrication and changing accessories. Inspect tool cord
periodically and if damaged have it replaced by an authorised service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry,
clean and free of oil or grease.
15. Disconnect tools.
When not in use, before servicing and when changing accessories such as blades,
bits and cutters, remove the mains plug from the socket.
16. Remove adjusting keys and wrenches.
Make the habit of checking to see that keys and adjusting wrenches are removed
from the tool before turning it on.
17. Avoid unintentional starting.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is in the
off position when plugging in.
18. Use outdoor extension leads.
When tool is used outdoors, use only extension leads approved for outdoor
use.
19. Stay alert.
Watch what you are doing. Use common sense. Do not operate tool when you
are tired or under the influence of drugs or alcohol.
20. Check damaged parts.
Before further use of the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired
or replaced by an authorised service centre unless otherwise indicated in this
instruction manual. Have defective switches replaced by an authorised service
facility. Do not use the tool if the switch does not turn it on and off.
21. Warning.
The use of any accessory or attachment, other than those recommended in this
instruction manual may present a risk of personal injury.
22. Have your tools repaired by qualified person.
This electrical tool is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare
parts, otherwise this may result in considerable danger to the user.
HEALTH ADVICE
WARNING!
When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.