ERA KP700, Руководство по установке

Страница: 8 / 20

3.SETTINGS
ENTER SETUP STATE
The keypad should enter setup state before all settings.
Input [admin code + #] to wake up keypad.
Press [3] to enter setup state, the LED indicator is on.
1
1
2
Under setup state, if there is no operation within 10 seconds, the keypad will exit
setup state automatically. You can also press [#] to exit.
2
EXIT DELAY
The exit delay allows time to leave after arming the system. After the delay time, if
you are sill at home, you may trigger an alarm.
This setting does not apply to Stay Mode.
If the delay time of both control panel and keypad are set delay time respectively,
the actual delay time is the total of both times.
Enter setup state, input:
*
2
*
delay time
*
6