ERA KP700, Руководство по установке

Страница: 13 / 20

When one beep is heard and the LED indicator keeps on for 10 seconds, the
setup is successful.
Note:
User code is 4 digits; default code is “1234”.
CHANGE ADMIN CODE
Using admin code can wake up keypad, send Arm, Disarm, Stay Mode commands to
the control panel, and also change any settings of the keypad.
To avoid passcode reveal, please change admin code for first time.
Enter setup state, input:
*
9
*
new admin code
*
When one beep is heard and the LED indicator keeps on for 10 seconds, the
setup is successful.
Note: Admin code is 6 digits; default code is “123456”.
RESET
After reset, the user code, admin code, and other settings will restore to default
except that the connected RFID tags can still disarm and open electronic door lock.
Enter setup state, input:
*
0
**
When one beep is heard and the LED indicator keeps on for 10 seconds, the
setup is successful.
11