Equus VI DIS, Руководство пользователя

Страница: 158 / 317

155
PHONE
Pairing/connecting/disconnecting a mobile phone
Pairing includes two steps: the mobile
phone's search for the Driver
Information System and the
subsequent entry of the passkey on
the mobile phone.

The default value of the passkey is 1234.
You can change the passkey, see section
“Changing the passkey” on page 171.
There are 2 minutes of time available
for entering the passkey.

Bluetooth
®
name of the Driver
Information System

Passkey

Remaining time for entry of the passkey
Start the search for the Driver
Information System on the mobile
phone. Proceed as described in the
user manual for your mobile phone.
The Bluetooth
®
name of the Driver
Information System is GENESIS , it is
displayed under this name on the
mobile phone.
Start pairing on the mobile phone.
When the mobile phone asks for the
passkey, enter it on the mobile phone.

The Driver Information System displays the
current passkey, see previously illustration.
The default value of the passkey is 1234.
For the future, it is possible to change the
passkey, see section “Changing the
passkey” on page 171.
The system will abort entry of the
passkey if the 2 minutes of time are
running out without the passkey being
entered.
If the passkey has been correctly entered,
the mobile phone is paired with the system
and automatically connected with the
system. You will see an appropriate status
display that automatically closes after a
short time.

Some mobile phones make a request at the
end of the pairing, if the connection should
be made automatically or requested each
time.
If the passkey has not been correctly
entered, you will see a prompt.