Equitel N968 Скачать руководство пользователя страница 91

Страница: 91 / 155

September 2011 Ed.2.0

EQUITEL – Technical Manual N968

[NOTE]

Because the access port doesn’t have an understanding of tagged frame, the

field of Tagged VID is not available.



Trunk Link:

A segment which provides the link path for one or more

VLAN-aware devices. A Trunk Port connecting to the trunk link has an

understanding of tagged frame, which is used for communications across

VLANs. Which frames of the specified VIDs will be forwarded depends on the

values filled in the Tagged VID field. Please insert a comma between two VIDs.

[NOTE]

1. A trunk port doesn’t insert tags into an untagged frame, and therefore the

untagged VID field is not available.

2. It’s not necessary to type ‘1’ in the tagged VID field. The trunk port will

forward the frames of VLAN 1.

3. The trunk port has to be connected to a trunk/hybrid port of the other switch.

Both the tagged VID of the two ports have to be the same.



Hybrid Link:

A segment which consists of Access and Trunk links. The hybrid

port has both the features of the access and trunk ports. A hybrid port has a

PVID belonging to a particular VLAN, and also forwards the specified

tagged-frames for the purpose of VLAN communications between switches.

[NOTE]

1. It’s not necessary to type ‘1’ in the tagged VID field. The hybrid port will

forward the frames of VLAN 1.

2. The trunk port has to be connected to a trunk/hybrid port of the other switch.

Both the tagged VID of the two ports have to be the same.



Untagged Vid:

This field is available when the

Link Type

pull-down menu is set on

Access Link

Hybrid Link

. Assign a number in the range between 1 and 4094.



Tagged Vid:

This field is available when the

Link Type

pull-down menu is set on

Trunk Link

Hybrid Link

. Assign a number in the range between 1 and 4094.



Click the Apply button on the tab to have the port configuration take effect.

Содержание N968




























































































































































Результаты поиска

Содержание N968

Отзывы:

Похожие инструкции для N968

Бренды по названию

Популярные бренды

Equitel N968, Руководство пользователя

Результаты поиска

Содержание N968

Отзывы:

Похожие инструкции для N968

Бренды по названию

Популярные бренды