July 2015 - Ed.1.2
E430 IP music and announcements server. User’s manual
Page 5
Chapter 4 : Configuration and control of the device
4.1
Accessing the device
Connect the device to the Ethernet network and the power supply.
Press the power button if necessary (A blue light comes from it when it is turned on).
The devices are configured in factory to acquire its IP address by DHCP. If your network has a DCHP server, it
will assign a valid IP to the device about 40 seconds after turning the device on.
If there is no DHCP server or is not accessible for any reason, after approximately 1 minute of not being able
to connect, the device will configure itself with the following access parameters:
IP
:
192.168.1.1
Subnet
Mask
:
255.255.255.0
Gateway
:
192.168.1.254
To know the IP address of the device in order to gain access to it:
Use the free "EQUITEL Devices Searcher" application, for locating Equitel devices in an Ethernet
network. This app is available at
ENA main website
In this example the E430 IP address is ‘
192.168.1.161
’.
Once the IP is known, you can access the web server as detailed in the following section. For further details
about discovering a device, please see section 5.3
NOTE: When accessing the web page, a Javascript enabled browser is needed. The following were tested:
IE 10+
Firefox 32 and above
Google Chrome 38
Figure 3 - EQUITEL devices searcher