July 2015 - Ed.1.2
E430 IP music and announcements server. User’s manual
Page 18
4.2.3.
Configuration
This page contains the ‘Network, ‘Security, ‘Date/Time and ‘Reboot’ subsections.
4.2.3.1.
Network
Legacy RTP mp3
: Check this option when you want to send MP3 streams to ENA decoders
with firmware version 3.06 (default unchecked).
Name
: Device identifier.
Mode
:
o
Static IP
(recommended) to set manually all the params in the network (IP,Mask…)
o
Dynamic IP
to obtain the parameters from a DHCP server
NOTE
: Once again, don’t forget to press the top
Save & apply
button to apply changes. If new static IP
parameters are found, you will be reconnected to the new IP address, if dynamic mode is set, a
message will be shown and you will need to discover the device with the “Equitel Devices Searcher”
after a few seconds to know which IP address the device has been given by the DHCP server.
4.2.3.2.
Security
In this section you may change the username and password to access the web server. The changes
are made once the top button
Save & apply
has been pressed, taking effect at the start of the
following session.
Figure 14 - Security configuration
Figure 13 - Network configuration subpage