Equipter RB4000, Руководство оператора

Страница: 25 / 46

19
Figure 24. Dump, Roll Back, Lift, and Tailgate levers
Figure 25. Dumping Debris from Dump Box.
Emptying the Dump Box
The dump box can be dumped from any height or extension point. This allows transferal of debris into a
truck or roll back-type container.
To dump the debris from the Equipter:
Never extend or raise dump box without the
outriggers lowered. Always leave clearance for
the outriggers when positioning the Equipter.
Be aware of overhead power lines at all times.
Failure to maintain adequate clearance will
result in death or serious injury.
1. Drive the Equipter into position.
2. Engage parking brakes.
3. Lower the outriggers using the
appropriate precautions as outlined in the
outrigger section.
4. Using the “Roll Back” and “Lift” control
levers, raise and extend the dump box to
position it above the truck or container.
Maintain a level orientation using the “Dump”
lever.
5. Fully open the tailgate using the “Tailgate
lever”.
6. Use the “Dump” lever to angle the dump
box backward and empty the contents
completely.As the contents begin to unload,
the dump box should be raised slowly.
7. After the dump box is empty, close the
tailgate and return the dump box to the
transport position using all appropriate
levers.
8. Raise the outriggers completely using
the appropriate precautions outlined in the
outrigger section.
9. Disengage parking brake.