Equipter RB4000, Руководство оператора

Страница: 14 / 46

8
The Equipter is designed for contractors to simplify a difficult job - cleanup. It takes this labor intensive,
time-consuming job to a level of automation not found previously. This ingenious machine will not only
simplify your work, it reduces traffic through carefully manicured flower beds, around fences, and over
shrubbery. Your customers will quickly see the benefits of less wear and tear through their yard.
The Equipter is a simple and durable time saver. It can be towed to the jobsite by most pickup trucks. At
the jobsite, it is disconnected from the tow vehicle and becomes a self-propelled vehicle. It can be driven
into place across yards and the dump bed extended and/or raised over fences, shrubbery, and flower
beds.
At about 6 feet wide the Equipter fits places where trucks and trailers do not. Once in position, lids on the
dump bed open to provide nearly 11 feet of “collection” coverage. The dump bed can be positioned just
under a roof’s overhang to prevent debris from falling on the ground or driveway.
When the job is done, the Equipter is driven to the desired location and the debris dumped into a waiting
container or truck. The Equipter can clear 11 feet allowing most standard dump trucks to be used to haul
away debris.
O V E R V I E W
Figure 4. Equipter Positioned Under Roof. Figure 5. Equipter Dumping into Truck.
Never perform maintenance on this machine unless the lift is completely in the down position. The dump
box can be tilted in the dump position secured with the support arm but never with the dump box lifted.
Make sure all operating and residual pressures are relieved before working on a hydraulic system.
Shut engine off and operate all the controls to relieve any pressure.
Use only manufacturer recommended replacement parts. Other parts may be substandard in fit and
quality.