The cutout dimension for the separate control panel is 370 mm (14-
9/16”) x 72 mm (2-7/8”). Maximum distance from the base unit is
determined by the length of the included ribbon cable. Mounting is
slightly different, as six 6 mm (15/64”) holes will need to be drilled for
the mounting bolts to pass through the countertop. NSF approved high
temperature sealant is still required. Attach the nuts and connect the
ribbon cable to the base unit.
ASSEMBLY
The Induction Cooker comes from the factory completely assembled. It may be
shipped with plastic exterior protective film, all of which must be removed before
operation. DO NOT operate the appliance prior to removing the protective film
completely.
NE PAS faire fonctionner l'appareil avant de retirer le film de protection
complètement
OPERATION