Troubleshooting
PROBLEM
POSSIBLE CAUSES
ACTION
A light blinks when
switching on
Normal operation
Nothing
No power when turning
unit on
No power at outlet or
outlet wiring bad
Correct problem and test
again
Fan runs for a few
minutes after the
appliance is switched off
The unit is cooling down;
normal operation
Nothing
The unit is not working.
The lights on the control
panel are off
There is not power to the
appliance, no power to
outlet or blown internal
fuse
Restore power to outlet or
return unit for service
“F” then “-“ appears on the
control panel
A control panel button is
stuck on
Clean front panel or return
for service
“F” then “7” appears on
the control panel
The circuit board is
overheating
Make sure fan is operating
and unit is properly
ventilated
The appliance is not
functioning, another code
is displayed
Problem with circuit board
Call service center
After turning unit on the
set cook level indicator
keeps blinking
Cookware not induction
ready or too small
See cookware section
The cookware is making
noise during cooking
This is a vibration
generated by the induction
of the cookware
This is normal with some
types of cookware and will
not damage the unit
There is a slight odor
during first operation
This is normal with any
new appliance
After using for about 30
minutes the odor will go
away
If the glass cracks discontinue use, unplug the unit immediately
and contact the manufacturer.