www.equip-info.net
Manual_
Page 6
Power On Switch Box
Data switch box draws power from PCs. When one of PCs is powered on, it will link the USB
device to this PC first.
Push Button
USB data switch supports a push button. To press the push button and will wait 2 seconds
for switching current PC port to another one.
Hot Key Control
The user does not leave his desk to press the push button. The Hot Key application can save
your time and improve office efficiency.
Press Scroll Lock twice within two seconds to retrieve the USB device port.
+
= Retrieve the USB device
If the destination PC port is empty or powered off, there is only push button can be used at
this moment
This switch box does not support hot key function for Mac and Sun Micro Systems.
i.e. They need use push button to switch the PC port
Note
If the PC LED flashes, please dont use hot key command until LED is lit
Note
If PC goes into sleeping mode, please dont use hot key command until to wake PC up first.
Note
If you want to switch PC port and the connected USB device is storage such as HDD, CDRW,
etc., please be careful to make sure the other computer finishes the job.
8.0 Usage
Before installation, please make sure all of peripherals and computers have been turned off.
1. To connect USB A-B cable type B connector to PC port of data switch and the cable
type A connector to PC.
2. To connect the cable type A connector , which accompanied with USB device, to the
USB device port of data switch.
3. Power on PCs
9.0 Hardware Installation
