DMX Chart
Channel 1
Channel 2
Channel 3
0 Black
1-14 Program 1
Speed 0-255
Flash 0-255
15-29 Program 2
30-44 Program 3
45-59 Program 4
60-74 Program 5
75-89 Program 6
90-104 Program 7
105-119 Program 8
120-134 Program 9
135-149 Program 10
150-164 Program 11
165-179 Program 12
180-194 Program 13
195-209 Program 14
210-224 Program 15
225-255 Sound
Sensitivity 0-255
5, Master/Slave Mode
Press the
MODE
button until the master/slave mode is displayed “
SLAv
”. The slave fixtures will
follow the program set on the master fixture when linked via DMX cables.
6, MC Mode
Plug the smart controller (CONT18, not supplied) into the fixture. The
AUTO RUN
,
SOUND AC-
TIVE
or
BLACKOUT
buttons on the controller can be used to control the programs on the fixture.
Note
The LED display will blackout if there is no operation selected on the fixture for 20 seconds. The
fixture will become active again by pressing any of the mode selection buttons.
By pressing the
MODE
and
SETUP
buttons at the same time for a few seconds the fixture will be
restored to factory settings.
Equinox Revolution
Operation
