6
Review the options in the middle of the Control Panel to select
additional functions.
Extra Button
– You may select:
Sanitize – increases the water temperature in the final rinse.
Rinse – adds an extra rinse to the selected wash cycle.
Dry – increases water temperature.
·
·
·
Delay Button
– You can delay the start of the program.
Pressing this button will add time in one-hour increments.
To cancel Delay, open the dishwasher, then press and hold the
Start button for 3 seconds.
Half Load/Hi-Temp Button
– Press this button to select half load
and high temperature functions.
For Half Load, you can select Upper Basket, Lower Basket or both
Baskets. The red LED light will show your selection.
For Hi-Temp function, press and hold down this button for 3 seconds.
This will increase the water temperature and the wash cycle time.
Start/Pause Button
After the wash cycle and all optional functions are selected, press
the Start button to begin the wash cycle. As the programmed cycle
progresses, the LED indicator lights will show on the panel at each
stage: wash, rinse and dry.
During a wash cycle, the Display Panel will show the time remaining
in the cycle. If you press and hold down the Start/Pause button for
3 seconds, the program will cancel and stop.
If you open the dishwasher door while the program is running, the
machine will stop. If you close the door within 4 seconds, the
program will continue running automatically. If longer than
4 seconds, press the Start button to resume the program.
