4. FILTER CLEAN
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Filter becomes dirty during use, or after 150 hours usage, the indication
flashes with sounds “BE, BE, BE…”. Press
OK
, sounds stop while flash. Turn
the appliance off, then remove the filter on the back of the appliance. Clean the
filter directly under water. Do not use caustic or abrasive material during
cleaning, as this can damage the filter. Then, have the filter dried naturally.
The machine can’t work until disappear, which will take around 15 minutes.
Then reassemble the filter according to the reference line(see below drawing).
Push the filter to the end until it cannot move anymore.
NOTE: You can remove and reassemble the filter from left.
BH-1701E
230-240 V~ 50 Hz
2000 W
IP24
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
65
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
66
When the product is plugged and push the ON/OFF (0/I) button located at the back of the
appliance,the buzzer “beeps” and the screen flashes for 3s, then in the standby mode. Push
again, if you want to switch off.
In standby mode,you can set the day and time.
SET THE CURREN DAY
Press
SET
, the day icon
（
1 2 3 4 5 6 7
）
flashes. Use + and - to set current day. Then press
OK
,
it will save and enter into next step automatically for hour setting.
SET THE CURREN HOUR
The hour icon 01:00 flashes. Use + and - to set hour. Then press
OK
, the minute icon
00:01flashes. Use + and - to set minutes. In the end ,press
OK
to confirm and save automatically.
Manual mode:
Press ,start at 2000W (show on screen), you can do the following:
1) SET TEMPERATURE
Press
SET
, setting temperature flashes 20 (default temperature setting is 20°C), use + and - to
set and press
OK
to confirm(selected temperature range 5°C - 40°C).
2) CHANGE POWER
In Manual mode, press to set the power in following order: 2000W( )-1000W( )
-Fan ( ). Press again, the power changing will repeat the cycle.
Window mode(ONLY work during manual program):
Press to turn on open-window detection:
During open-window detection mode,once the ambient temperature drops 5-10
℃
within 10
minutes, then the product will stop working within 30 minutes and enter into stand by mode.
Press the button again to turn off open-window detection.
WEEKLY PROGRAM SETTING (PROGRAM MODE)
Weekly program explain:
1. It can set day by day from Monday to Sunday. And for each day, it can set 2 working periods
(P1/ P2).
2. The product works at full power(2000W) during weekly program.
3. Body sensor only works in weekly program if turn on.
WEEKLY PROGRAM SETTING:
In STANDY MODE: Press for 3 seconds, it enters into WEEKLY PROGRAM setting,the icon
flashes on the screen until complete the whole setting. And the day icon (1 2 3 4 5 6 7) flashes,
use + and - to select the day, P1 shows in screen (The wake up time for the initial setting, the
time shows “OFF”. Press , the time become and can start to set ). Press
OK
, it enters
into next step - wake up time setting: the hour flash (use + and - to set(23-hours). Then press
OK
, it enters into next step - minutes setting: the minute icon flashes. Use + and – to
set minute(0-58 minutes). Then press
OK
, it enters into next step - temperature setting: setting
temperature flashes 20 (default temperature setting is 20°C ), use + and - to set(selected
temperature range 5°C - 40°C). Press
OK
, it enters into next step - OFF time setting:
the hour flash use + and - to set(23-hours). Then press
OK
, it enters into next step - minutes
setting: to minute setting, the minute icon flashes. Use + and – to set minute (0-59
minutes). Press
OK
to confirm and it automatically enter to next working period. In this cycle,
you can set 7 days on/off timer.
The will be displayed on the working status. If you want to turn off the weekly program,
press to turn off,and the screen will disappear.
During the process of WEEKLY program setting, if you want to quick finish the setting, press
for 3 seconds to confirm and exit.
After complete all settings(14 working periods=7daysx2periods/day), if you want to
remove 1 period: go to this period, then press , the time will change to “OFF”.
For the current day: Before P1 starts, P1 working period will on the screen; If P1 pass, P2
working period will on the screen; If P2 pass, the timer symbol will show on the screen.
1.
2.
3.
Remark:
Note: The maximum weightbearing for towel should less than 2kg/bar(6 kg in total for 3
bars).
BODY SENSOR (ONLY work during weekly program)
Press to turn on body sensor, the icon flashes on the screen. Press again, it will turn off,
and the icon disappear on screen. The body sensor will only work during WEEKLY PROGRAM
MODE, not work during MANUAL MODE. When body sensor works, if nobody is detected within 15
minutes, it will turn off the machine automatically.
After switch on the machine, press once to turn on the towel rack, press one more to
turn off.
When the towel rack is turned on: if fold the towel rack, icon disappear at the screen, and
stop towel heating; if unfold the towel rack, icon shows at the screen and it start to heat
with 45W.
The towel rack heating function is independent, no link with the heating of machine. The
working period is 2hours.The towel will stop automatically in 2 hours if you don’t turn it off
manually, and icon disappear from the screen.
1.
2.
3.
TOWEL HEATING:
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously
supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided that it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
CAUTION - Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and vulnerable
people are present.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
CAUTION:
In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
WARNING:
In order to avoid overheating, do not cover the
heater.
The heater must not be located immediately below a socket-outlet.
WARNING:
In order to avoid a hazard for very young children, this appliance
should be installed so that the lowest heated rail is at least 600 mm above the
floor.
Appliance is to be supplied through a residual current device (RCD) having a
rated residual operating current not exceeding 30 mA.
Means for disconnection having a contact separation in all poles must be
incorporated in the fixed wiring in accordance with the wiring rules.
Regarding the information for the installation and the connection of the
appliance, please refer to the relevant paragraphs below.
Concerning installation information, please refer to the chapter<<
Installation>> and <<Fixation of the appliance on the wall>>.
5. RECYCLING
