Equalizer SG11TM, Руководство по эксплуатации и обслуживанию

Страница: 23 / 76

IM_SGM_07 21
6. Storage
6. Once bags have been closed and sealed
DO NOT re-open. Any visual inspections
must be done with closed and sealed
bags. If bags are opened the components
will have to be dried, re-coated and re-
sealed in bags/shrink wrap.
7. Replace silica gel (100g)
EVERY TIME the case is
opened.
NOTE: depending on moisture content of
air, silica gel should be changed weekly.
8. Visually inspect kits after 30-days and
every 30-days thereafter. Remember to
replace silica gel before closing case.
6.1 Recommended Storage
Equalizer Flange Spreader Secure Grip tools should be stored in a cool dry place. Tools
should always be cleaned, serviced and lubricated prior to storage. Ensure that tools are
stored in their designated packing cases.
6.2 Long-Term Storage - Maintenance Plan
1. Rub components down with a dry cloth
to remove moisture.
2. Coat EVERY surface and contact
point with a corrosion inhibitor. Where
necessary, coat inside and outside of
component e.g. VC10
3. Nuts and threads must also be coated
with a corrosion inhibitor.
4. Once surfaces have been coated,
seal individual components
in clear plastic bags or clear
vacuum bags or clear shrink wrap.
NOTE: bags/shrink wrap must be clear
for visibility. Take care when using shrink
wrap that the tool is / components are
still easy to see.
5. Remove all or, where not vacuum sealed,
as much air from bags as possible.