manualshive.com logo in svg

Equalizer SG11TM, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Equalizer SG11TM Скачать руководство пользователя страница 15

IM_SGM_07

13

5.4  Collet Replacement

Once the correct collet has been selected it 
may be necessary to change the collet on 
the SG4TM, SG6TM, or SG11TM tool: 
Place the tool on its side on a work bench or 
flat surface. Unscrew and remove the collet 
nut.

Pull the Collet Spring Plunger Ring to 
release and remove the collet head 
assembly.

Remove the Drive Cone and Collet from the 
Collet Holder. Replace the Collet with the 
applicable size for the flange joint as 
selected in Section 5.2.

Repeat the operation for the opposite Collet 
Leg Sub-assembly.
Reverse the procedure to re-assemble the 
tool. Care should be taken to ensure the slot 
in the Collet holder is aligned with the collet 
plunger.

5.5  Collet Leg Sub-Assembly -  

Installation

The Collet Leg Sub-assemblies, as used in 
tools SG4TM, SG6TM, SG11TM; should be 
the first parts of the tool fitted to the flange 
joint.
The Collets from each assembly should be 
installed into the bolt-hole of the flanges on 
either side of the joint to be spread. Care 
should be taken to ensure that the Collets 
are engaged in the correct position.

Содержание SG11TM













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды