SECURE-GRIP IN-LINE HYDRAULIC FLANGE SPREADERS
OPERATOR INSTRUCTION MANUAL
PAGE 18
6.6 RESTRICTED ACCESS INSTALLATION AND OPERATION
7KH6HFXUH*ULSLQOLQHK\GUDXOLFWRROVDUHDOVRLGHDOIRUXVHZKHUHDFFHVVWRWKHÀDQJHLVUHVWULFW
-
HG$VLQWKHVWDQGDUGRSHUDWLRQWZRWRROVVKRXOGEHXVHGLQRUGHUWRDYRLGÀDQJHGLVWRUWLRQZLWK
WKHWRROVSRVLWLRQHGIURPHDFKRWKHURQWKHÀDQJH
1.
0HDVXUHWKHWKLFNQHVVRIWKHÀDQJH
with the vernier calliper provided
2.
Remove the drive nut from the
spreading plug and position it
EHWZHHQWKHÀDQJHDQGWKH
restriction as shown. With the nut
removed ensure the drive cone does
not fall or slide off the spreading
plug during installation.
3.
Pass the spreading plug collet and
GULYHFRQHWKURXJKWKHEROWKROH
DQGUH¿WWKHGULYHQXW
Using the vernier calliper as a depth
gauge, adjust the position of the
VSUHDGLQJSOXJLQWKHEROWKROHVR
that the collet is fully through one
ÀDQJHEXWQRWHQWHULQJWKHEROWKROH
of the other.
4.
Tighten the drive nut with the ‘C’
spanner
7KHSURFHGXUHFDQQRZEHFRPSOHWHGE\IROORZLQJVWHSVRIWKHVWDQGDUGLQVWDOODWLRQ
SURFHGXUHVHHVHFWLRQ
RESTRICTED
ACCESS
VERNIER
CALLIPER
SPREADING
PLUG
NUT
‘C’ SPANNER
Содержание SG18TE
Страница 2: ......
