Equalizer International SG18TE, Инструкция оператора

Страница: 31 / 42

SECURE-GRIP IN-LINE HYDRAULIC FLANGE SPREADERS
OPERATOR INSTRUCTION MANUAL
PAGE 29
3UREOHP$SDLURIFROOHWVFRPSOHWHZLWKWKHVSUHDGLQJSOXJDQGFROOHWKROGHUDUHMDPPHGLQDEROWKROH
¬
A collet which is too
VPDOORUODUJHKDVEHHQ
selected, or the collet
KDVEHHQLQVHUWHGLQWR
a damaged or non-
URXQGEROWKROH
’
7KHÀDQJHPXVWEHVSUHDGEHIRUHUHPRYDOFDQEHDWWHPSWHG7KLVFDQEHGRQHXVLQJ
another two, three or four tools depending on the spreading force required. Removal
FDQWKHQEHDFKLHYHGDVIROORZV
1. Release all hydraulic
SUHVVXUHIURPWKHWRROE\
turning the release valve
anti-clockwise
2. Remove the hydraulic hose
IURPWKHF\OLQGHUDVVHPEO\
3. Unscrew the cylinder
DVVHPEO\IURPWKHFROOHW
holder
4. Unscrew the drive nut and
remove the drive cone from
the collet holder
5. 6FUHZWKHGULYHQXWEDFN
onto the collet holder until it
is 1-2mm off the end
6. Using a hammer and a
VXLWDEOHGULIWPRYHWKH
collet holder until it is
SRVVLEOHWRFXWRIIWKH
tapered end of the collet
holder
7. Cut off the tapered end
of the collet holder with a
hacksaw or other cutting
tool
8. Withdraw the collet holder
IURPWKHEROWKROH
9. Unscrew the drive nut and
remove the drive cone from
the spreading plug
10. Using a hammer and a
VXLWDEOHGULIWPRYHWKH
spreading plug up to the
collet and drive it out
11. Drive the remaining collet
out using the spreading plug
CUT HERE