eQ-3 Station P Скачать руководство пользователя страница 32

Страница: 32 / 32

FCC ID: RNT-PTD300US

Changes or modifications not expressly approved in writing by eQ-3

Limited may void the user‘s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

The internal antenna used for this mobile transmitter must provide a

separation distance of at least 20 cm from all persons and must not

be co-located or operating in conjunction with any other antenna or

transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interfe-

rence that may cause undesired operation.

20. FCC information

1st English edition October 2006

or duplicated or processed using electronic, mechanical or chemical procedures without

written permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this

handbook is regularly checked and corrections made in the next issue. We accept no

liability for technical mistakes or printing errors, or their consequences. All trademarks

and patents are acknowledged.

Printed in Hong Kong

Modifications due to technical improvements may be made without prior notification.

00066789 Y2006 V1.0

Содержание Station P

































Результаты поиска

Содержание Station P

Отзывы:

Похожие инструкции для Station P

Бренды по названию

Популярные бренды

eQ-3 Station P, Руководство по эксплуатации

Результаты поиска

Содержание Station P

Отзывы:

Похожие инструкции для Station P

Бренды по названию

Популярные бренды