10.1. Selecting temperature unit
The temperature unit can be switched between
displaying in ˚F or ˚C.
°F/˚C switching
- Press the key ”SELECT” for approx.
3 seconds. In both display panels the unit
changes from ˚F to ˚C and vice versa.
10.2. Setting the temperature alarm
values (limits)
For any sensor you can set-up a high and/or
low temperature limit. If the limit is exceed-
ed, a temperature alarm is activated.
•
In factory setting the temperature
alarm is disabled (no limits set).
•
The adjustable range is (independent
of the sensor type) -21.8˚F up to
+175.8˚F. Consider the measuring
limits of the particular sensor when
setting the alarm limits.
•
If you want adjust only high or low
limit, set the particular other limit to
”– – .– ” (disabled). This setting fol-
lows the value ”+175.8˚F”.
•
The temperature alarm is only active
for the displayed sensors (in display
panel A and B), that means, if the
temperature of not displayed sensors
is below or higher than this limits, no
alarm will be activated.
10. Configuration
> 3 seconds
SELECT
F
