Rev.03242022JA
3 | S\N: 203E +
WARNING
The Screen’s
Top Black Drop
is already set to its maximum drop distance. There is
NO
extra top black drop in the
roller. Please be aware of this as it will void the limitation of your warranty.
Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please
contact Customer Service for any questions.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a installation. If this equipment causes
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures.
✓
Reorient or relocate the receiving antenna of the device which may be causing the interference.
✓
Increase the separation between the screen and the device’s receiver.
✓
Connect the equipment into a different power outlet other than the device.
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen in a leveled position on a clean surface.
3.
In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles
such as dust, sawdust, and/or liquids.
NOTE
Wall screws included with this product are complimentary and may not be adequate for all mounting surfaces.
Consult with a professional installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the
viewing surface will not cause the casing to become loose or fall. The installer must ensure that the fasteners used
are of adequate strength and suitable for the installation location.
Hardware Parts List for Twilight Electric Series
A. Mounting Bracket
x2pcs
B. M10 Anchor and
M4x50 Screw x4pcs
C. M8x35 Anchor and
M4x35 Screw x4pcs
D. Suspended Ceiling
Bracket Connector x2pcs
E. M5x15 Screw&
Bolt x4pcs
G. Magnetic weight
bar bracket x2pcs
H. Curved Stake
x2pcs
I. Snap link x2pcs
J. Elastic String x2pcs
K. Bubble leveler
x1pc
