background image

Rev.03242022JA 

www.epvscreens.com

  

2 | S\N: 203E + 

 

 

Understanding the Ingress Protection Rating IP33 
 

 

 
Important Safety & Warning Precautions 

Make sure to read this user’s guide and follow the procedures below. 

 

Please retain this user’s guide for future reference. 

 

To  avoid  damaging  the  unit,  do  not  use  with  any  unauthorized  accessories  not  recommended  by  the 
manufacturer.  

 

Handle the unit carefully during transportation to avoid any damages. 

 

To ensure safe and reliable operation, direct connection to a properly grounded power source is advised. 

 

The power outlet supplying power to the unit should be close to the unit and easily accessible. 

 

Do not install the unit on uneven or inclined surfaces. 

 

Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle. 

 

Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit. 

 

There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one 
except authorized technicians can open and make repairs to this unit. 

 

Make sure the power source this unit is connected to has a continuous power flow. 

 

If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid 
overheat. 

 

Do not handle the power plug when your hands are wet or your feet are in contact with water. 

 
Do not use this unit under the following circumstances. 

 

Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

 

 

Avoid direct Sunshine, rain shower and moisture.

 

 

Keep away from fire sources and high temperature to prevent this device from overheating.

 

 

Cut off the power supply first before transportation or maintenance.

 

 

Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be 
done with any other electric household appliance.

 

 

To  avoid  possible  injury  and/or  an  electric  shock,  do  not  attempt  to  use  the  screen  if  there  is  obvious 
damage or if there are any evident broken parts.

 

 
 

Содержание Twilight Portable Series










Отзывы: