Rev.051313-JA
7
www.elitescreens.com/epv
UP
Stop
Down
3 Way Wall Switch
IR “Eye” Receiver
6. In-wall RJ45 Module:
The RJ45 module connects to a local wall switch for Up/Down control of your
electric screen. Please follow the picture diagram below for instructions on how to connect this accessory.
Steps to attach Elite Screens Motorized Screen to your local wall switch
1. Attach the
in-wall module
(Part #ZIW-Module) to your local wall switch as shown in diagram above
2. Attach an RJ45 Ethernet cable (not included) to the ZIW-Module and the other end to the RJ45 input on
your Elite electric screen .
3. After testing the connection, place the in-wall switch module in/on the wall and wire the Ethernet cable
into the wall and complete the setup.
For more information, technical support or your local Elite Screens
contact, please visit www.elitescreens.com
2. 3-Way Wall Switch:
The 3-way wall switch is a wall
mount control box with an up/stop/down button and
plugs directly into the screen’s RJ-45 input.
3. IR “Eye” Receiver:
The IR “Eye” Receiver plugs
directly into the screen’s RJ45 input to present a low
profile line-of-sight control option for your IR remote
control even in a recessed ceiling installation.
4. IR Remote Control:
The Infrared functions
by direct line of sight contact with a beam
range of 30 feet.
5. RF Remote Control:
The radio waves eliminate
the need for a direct line of sight with a range of
100 feet.
Note: Please be aware that Ethernet cables have length
limitations so please make a test first before concealing
the cable into the wall.
