background image

Rev.051313-JA 

www.elitescreens.com/epv 

 

 

 

 

Electric Motorized Projection Screen 

 

PowerMax Tension Series 

 

User’s Guide 

 
 

Important Safety & Warning Precautions 

Make sure to read this user’s guide and follow the procedures below. 

 
Caution

: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black  

Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved 
changes or modifications (except for cutting the power cord for hardwire installations) to this unit are  
prohibited and will void your warranty. For more information, please contact our Technical Support  
Department at (877) 511-1211 Ext. 604. 

 

 

Please retain this user’s guide for future reference. 

 

To avoid damaging the unit, do not use with any unauthorized accessories not recommended by 
the manufacturer.  

 

Handle the unit carefully during transportation to avoid any damages. 

 

To ensure safe and reliable operation, direct connection to a properly grounded power source is 
advised. 

 

The power outlet supplying power to the unit should be close to the unit and easily accessible. 

 

Do not install the unit on uneven or inclined surfaces. 

 

Do not put heavy objects on the power cord and position it properly to avoid creating a trip 
obstacle. 

 

Never overload the power cord to prevent an electric shock or fire due to a loose contact or a 
short circuit. 

 

There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by 
yourself. No one except authorized technicians can open and make repairs to this unit. 

 

Make sure the power source this unit is connected to has a continuous power flow. 

 

If there is need to use an extension cord, make sure the cord has an equal rating as the appliance 
to avoid overheat. 

 

Do not handle the power plug when your hands are wet or your feet are in contact with water. 

 
 
 

Содержание PowerMax Tension Series








Отзывы: