Rev.051313-JA
6
www.elitescreens.com/epv
Release Tab Pull bottom of case first away from wall/ceiling
Screen material tension adjustment
(4mm Allen Wrench required and not included)
Remove the weight bar end cap to expose the adjustment tension knob. Insert your 4mm Allen Wrench to push in
the adjustment tension knob, turn clockwise and your screen will gain more tension. Turn the Allen Wrench counter
clockwise and the screen will lose tension. Please note this adjustment is not necessary as the tension of the screen
has been set to its factory setting for best performance. Please contact Elite Screens for assistance to avoid damaging
the screen and voiding your warranty at
Push
Tension Knob
Control System for PowerMax Tension Series
3 Prong Power Cable
RJ-45 Input
5-12 Volt Trigger Cable
1. 5-12V Trigger:
The built-in 5-12V trigger input
allows your screen to synchronize its drop & rise
with the projector’s power cycle. The screen
deploys when the projector powers up and will
retract when the projector powers down. The 5-12
volt adaptor connects to your projector’s trigger
output via a separate cable that may or may not
be provided by the manufacturer of the projector.
The trigger feature will not work without an
output cable from the projector, but it can be
tested by connecting the Red (+) and Green (-)
cable to a 9-volt battery.
Red: DC 12 +
Green: 0 V -
