Rev.072512-JA
3
www.elitescreens.com/epv
Accessories for Peregrine Tension Series
Please make sure all accessories listed below are included before proceeding.
Red+ Green - Red +
Control System for Peregrine Tension Series
5-12 Volt Trigger Cable
1. 5-12V Trigger:
The built-in 5-12V trigger plugs
directly into the screen’s RJ-45 input and allows
your screen to synchronize its drop & rise with
the projector’s power cycle. The screen deploys
when the projector powers on and will retract
when the projector powers off. The 5-12 volt
adaptor connects to your projector’s trigger
output via a separate cable that may or may not
be provided by the manufacturer of the
projector. The trigger feature will not work
without an output cable from the projector, but
it can be tested by connecting the Red (+) and
Green (-) cable to a 9-volt battery.
Red: DC 12 +
Green: 0 V -
2. 3 -Way Wall Switch:
The 3-way wall switch is a
wall mount control box with an up/stop/down
button and plugs directly into the screen’s RJ-45
input.
3. IR “Eye” Receiver:
The IR “Eye” Receiver plugs directly into
the screen’s RJ-45 input to present a low profile line-of-sight
control option for your IR remote control even in a recessed
ceiling installation. The IR “Eye” Receiver is compatible with
3
rd
party IR controllers.
IR “Eye” Receiver
A.
IR Remote
B.
RF Remote
C. 3-way wall switch
D. IR eye
receiver
G.
AAA batteries
E.
5-12v trigger
F. In-wall
RJ45 module
