Rev.072512-JA
5
www.elitescreens.com/epv
2.
Slide the
Extruded Hanging Bracket (D)
through the rail located below the slide channel until it
meets with the top of the
Bolt (B)
and slightly secure the lug-nuts located on the top & bottom of
the bolt to attach the bracket.
3.
Mark the installation location to drill your hole. Insert the proper screw and secure the bolts to the
bracket.
4.
Example of the Peregrine Tension installed to a wall, ceiling, and enclosed soffit.
How to adjust the Tension String
This adjustment is not required. The screen’s tension has been set to achieve its best performance. Please
contact Elite Screens for assistance to avoid damaging the screen and voiding your warranty.
1.
If the tension string is loose, pull and turn the tension knob clockwise to tighten the string. To
release the tension, pull and turn the knob counter-clockwise.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Top hole for ceiling installation
Back hole for wall installation
Flush mount
to wall
Flush mount
to ceiling
Enclosed
installation
*
Allow 2” of spacing between the
front and back of the screen casing
.
Tension Knob
rail
