6.
Tap
Start Setup
.
7.
Tap
Close
.
The screen automatically closes after a specific length of time if you do not tap
Close
.
Note:
If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8.
Tap
Close
on the network connection settings screen.
Related Information
&
“Checking the Network Connection Status” on page 33
&
“When You Cannot Make Network Settings” on page 195
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to an access point by using a PIN code. You can use this method to set up if an
access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
1.
Tap
on the home screen.
2.
Tap
Wi-Fi (Recommended)
.
3.
Tap
Start Setup
.
If the network connection is already set up, the connection details are displayed. Tap
Change Settings
to
change the settings.
4.
Tap
Others
>
PIN Code Setup (WPS)
.
5.
Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the access point within two minutes.
Note:
See the documentation provided with your access point for details on entering a PIN code.
6.
Tap
Start Setup
on the printer's control panel.
7.
Tap
Close
.
The screen automatically closes after a specific length of time if you do not tap
Close
.
Note:
If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
8.
Tap
Close
on the network connection settings screen.
Related Information
&
“Checking the Network Connection Status” on page 33
&
“When You Cannot Make Network Settings” on page 195
User's Guide
Network Settings
31