1.
Select
on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
2.
Select
Wi-Fi (Recommended)
.
The network status is displayed.
3.
Select
Change Settings
.
4.
Select
Others
>
Disable Wi-Fi
.
5.
Check the message, and then start setup.
6.
When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7.
Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
>
Disconnecting Wi-Fi Direct (Simple AP) Connection from the Control Panel
39