Epson V11H944820, Руководство пользователя

Страница: 128 / 336

128
Note: The test pattern's shape is determined by the Screen Type setting. Be sure to set the correct
screen type before adjusting with the test pattern.
1. Turn on the projector.
2. Press the Test Pattern button on the remote control or control panel.
Note: You can also display a test pattern from the Settings menu using the remote control.
3. Press the up or down arrow button on the remote control, or press Enter on the control panel to
cycle through the available test patterns.
4. Adjust the image as necessary.
Note: Some settings may not be available while displaying a test pattern. To adjust these settings,
project an image from a connected device.
5. Press the Esc button to clear the test pattern.
Parent topic: Using Basic Projector Features
Related tasks
Setting the Screen Type
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Correcting Image Shape with H/V Keystone
Correcting Image Shape with Quick Corner
Correcting Image Shape with Curved Surface
Correcting Image Shape with Corner Wall
Correcting Image Shape with Point Correction
Parent topic: Using Basic Projector Features