D
Check the Distance Range setting by the center hand
This value is used to read linear distances.
Note:
To change the Distance Range, press and release the
C
button to stop measuring, and then make setting.
U
“Changing the Distance Range” on page 97
E
With the dial facing straight up, wait until the reception result is displayed (the small
second hand points to
+
or
-
)
The indicator hand points to
M
, and the watch starts receiving signals.
Receiving a signal takes approximately 20 seconds to two minutes.
When receiving signals
The small second hand and the outside numbers (0/3/6/9) indicate the number of GPS satellites acquired.
<When the number of satellites acquired is 6>
MB73 (TR-MB7) User’s Guide
Waypoint Feature (COM)
101
Содержание Trume TR-MB7
Страница 1: ......
Страница 163: ... 2018 Seiko Epson Corporation Rev 1 0 EN ...