Epson TM-T70II, Техническое справочное руководство

Страница: 53 / 156

Chapter 2 Setup
53
2
Connecting the AC Adapter (PS-180)
Use t he PS-180 or a n eq ui vale nt prod u c t as t he AC adap t er.
Connecting the AC Adapter
1
Make sure the printer’s power supply is turned off and the AC adapter’s
power cable has been removed from the wall socket.
2
Insert the connector of the power supply cable onto the power supply
connector (stamped 24V ).
WARNING

Always use the EPSON PS-180 or an equivalent product as the AC adapter.

Using a nonstandard power supply can result in electric shock and fire.

Should a fault ever occur in the EPSON PS-180 or equivalent product, immediately
turn off the power to the printer and remove the power supply cable from the wall
socket.
WARNING

Be sure to remove the AC adapter’s cable from the wall socket whenever connect-
ing or disconnecting the AC adapter.

Failure to do so may result in damage to the AC adapter or the printer.

Make sure the wall socket power supply satisfies the rated voltage requirements
of the AC adapter. Never insert the power supply cable plug into a socket that
does not meet the rated voltage requirements of the AC adapter.

Doing so may result in damage to both the power supply and the printer.
Before removing the DC cable connector from the PS-180, make sure the power supply
cable has been removed from the AC adapter, then grasp the arrow-marked section of the
connector and pull straight out.
Power supply connector
Interface board