Epson TM-T70II Скачать руководство пользователя страница 2

Страница: 2 / 156

Cautions

• No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form

or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of Seiko Epson Corporation.

• The contents of this document are subject to change without notice. Please contact us for the latest

information.

• While every precaution has taken in the preparation of this document, Seiko Epson Corporation

assumes no responsibility for errors or omissions.

• Neither is any liability assumed for damages resulting from the use of the information contained

herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third

parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of:

accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this

product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating

and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of

any options or any consumable products other than those designated as Original EPSON Products or

EPSON Approved Products by Seiko Epson Corporation.

Trademarks

EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in Japan and other

countries/regions.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product and company names used herein are for identification purposes only

and may be trademarks of their respective companies.

ESC/POS

Command System

EPSON ESC/POS is a proprietary POS printer command system that includes patented or patent-

pending commands. ESC/POS is compatible with most EPSON POS printers and displays.

ESC/POS is designed to reduce the processing load on the host computer in POS environments. It com-

prises a set of highly functional and efficient commands and also offers the flexibility to easily make

future upgrades.

Содержание TM-T70II





























































































































































Результаты поиска

Содержание TM-T70II

Отзывы:

Похожие инструкции для TM-T70II

Бренды по названию

Популярные бренды

Epson TM-T70II, Техническое справочное руководство

Результаты поиска

Содержание TM-T70II

Отзывы:

Похожие инструкции для TM-T70II

Бренды по названию

Популярные бренды