Setting Up RIP-Queue
GamaPrint RIP-Queue interfaces with the printer and manages the queue of print jobs.
When you launch the application you must make sure the media settings match what
you have loaded in the printer.
On the right side of the RIP-Queue screen is the printer status panel. The Current
Media and Placement section displays the current media setup. To change this info:
1. Click the
‟
Change…
‟
button.
2. Select the appropriate media group and media (Backlit, Adhesive Vinyl, Clear Film
etc.).
3. Select the appropriate page size (30 inch roll, 60 inch roll, etc.)
4. Print orientation should be kept on vertical.
5. Placement should be kept on
‟
Print Jobs Individually
‟
when sending jobs from
Layout.
6. If you need to change the placement of jobs on the roll, click
‟
Setup
‟
and make
adjustments to the justification and o
ff
set.
12
Printer status panel
Queued jobs
Queued job
controls
Previously printed
jobs
