Epson SureColor F7200 Скачать руководство пользователя страница 196

Страница: 196 / 208

Notices

Check these sections for important notices about your product.

Note:

Epson offers a recycling program for end of life products. Please go to

this site

for information on

how to return your products for proper disposal.

Important Safety Instructions
FCC Compliance Statement
Software License Terms
Trademarks
Copyright Notice

Important Safety Instructions

Before using your Epson product, read and follow these safety instructions.

General Product Safety Instructions
Ink Pack Safety Instructions

Parent topic:

Notices

General Product Safety Instructions

• Be sure to follow all warnings and instructions marked on the product.

• Use only the type of power source indicated on the product's label.

• Use only the power cord that comes with the product. Use of another cord may cause fires or shock.

Do not use the cord with any other equipment.

• Place the product near a wall outlet where the plug can be easily unplugged.

• Connect your product to a properly grounded power outlet. Avoid plugging the product into an outlet

on the same circuit as a photo copier or air control system that regularly switches on and off, or on an
outlet controlled by a wall switch or timer.

• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying,

crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over.
Be careful to keep the cord straight at each end.

• If you use an extension cord with the product, make sure the total ampere rating of the devices

plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total

196

Содержание SureColor F7200

















































































































































































































Результаты поиска

Содержание SureColor F7200

Отзывы:

Бренды по названию

Популярные бренды

Epson SureColor F7200, Руководство пользователя

Результаты поиска

Содержание SureColor F7200

Отзывы:

Бренды по названию

Популярные бренды