Epson SureColor F7200 Скачать руководство пользователя страница 188

Страница: 188 / 208

Cleaning the Print Head
Aligning the Print Head
Adjusting the Media Feed

Printed Media is Stained or Marred

If the printed media is stained or the surface is marred, try these solutions:

• Make sure the media is not too thick or thin. Check that it meets the media specifications for your

product and RIP software.

• Check that the media is not creased or folded, causing it to contact the print head. If necessary, load

new media.

• If your media is wavy, press the down arrow button on the product control panel to feed the media past

the affected area. Make sure your printing environment is not too hot or humid to avoid wavy media.

• Clean the print head, wiper, and caps as necessary to remove ink that may have stained these parts

and transferred to your printout.

• Adjust the

Platen Gap

setting on the product control panel to prevent the print head from striking the

media as you print.

• If your printouts contain marks that look like those shown here, the print head is striking the media as

you print:

Try these solutions in this order until the results improve:

• Cut off any wrinkled or wavy media and do not load media until you are ready to print.

• Reload the media and check that all of the media settings are correct.

• Reattach the media to the auto take-up reel and make sure the media is taken up correctly.

188

Содержание SureColor F7200

















































































































































































































Результаты поиска

Содержание SureColor F7200

Отзывы:

Бренды по названию

Популярные бренды

Epson SureColor F7200, Руководство пользователя

Результаты поиска

Содержание SureColor F7200

Отзывы:

Бренды по названию

Популярные бренды