Epson Stylus Photo R3000 Series, Руководство по обслуживанию

Страница: 67 / 73

EPSON Stylus Photo R3000 Revision A
Confidential
Maintenance Lubrication Points and Instructions 67
Figure 3-8. CR Unit
<Lubrication Point>
1. PG Cam Left / Right
2. Left CR Shaft Mounting
Plate (x3)
3. Right CR Shaft
Mounting Plate (x3)
4. CR Shaft
(Contact points between
the Torsion Spring,
13.14 and the PG
Torsion spring Left)
5. CR Unit
(Contact points of the
CR Shaft)
6. CR Shaft
<Type>
1. 2. 3. 4. G-26
5. 6. G-71
<Application Amount>
1.

1 mm
2. 13 mg (total amount)
3.

2 mm x 40 mm

2 mm x 15 mm

1 mm x whole
circumference
4.

1 mm x 2 mm
5. 6. 140

10 mg (total
amount)
<Remarks>

1. Apply on the cam of
the PG Cam Left/Right
with injector.

2. 3. Apply with brush.

4. 5. Apply with injector.

6. Apply with the
following.
1. Apply the center of the
CR Shaft (x4) with
brush.
2. Apply twice (50 mm
each) on the left side of
the CR Shaft and
spread it with brush.
3. Move the CR Unit
back and forth seven
times slowly to spread
the grease.
4. Apply twice (50 mm
each) on the right side
of the CR Shaft and
spread it with brush.
5. Move the CR Unit
back and forth seven
times slowly to spread
the grease.
2. Application Point
1. Application Point
3. Application Point
4. Application Point
5. 6. Application Point
PG Cam Right
PG Cam Left
Right CR Shaft Mounting Plate
40 mm
15 mm
Left CR Shaft Mounting Plate
Bottom of CR Unit
50 mm 50 mm
CR Unit
CR Shaft
Figure 3-9. CR Guide Plate Figure 3-10. Front Tray Assy
<Lubrication Point>
Contact point of the CR
Unit
<Type>
G-71
<Application Amount>

2 mm x 70 mm
<Remarks>
On 1 mm from the end of
the frame, apply with
injector and spread it to 10
mm width with brush.
Application Point
CR Guide Plate
10 mm
1 mm
CR Guide Plate
<Lubrication Point>
Contact points (x2)
between the Front Tray
Shaft and the Torsion
Spring, 187.9
<Type>
G-26
<Application Amount>

2 mm x 1 mm
<Remarks>
Apply with injector.
Application Point
Left
Front Tray Assy
Right
Front Tray Assy
Front Tray Shaft
Front Tray Shaft
Figure 3-11. Front Tray
<Lubrication Point>
1. Front Tray
(Contact points (x5) of
the Front Tray Shaft)
2. EJ Link Left / Right
(x4 each)
3. Front Tray Guide Left /
Right (x10 each)
<Type>
G-74
<Application Amount>
Adequate amount
<Remarks>
---
EJ Link Left
EJ Link Right
Front Tray
Front Tray
Guide Left
Front Tray
Guide Right
Application Point