Epson Stylus Photo 950, Руководство по обслуживанию

Страница: 137 / 191

EPSON Stylus PHOTO 950 Revision A
ADJUSTMENT Adjustment 137
5. Select "Change data", and then OK button.
6. Following screen appears.
Figure 5-6. "Head ID" input Screen
7. Input 19 digits Head IDs, and press "OK" button.
NOTE: Actually, there are 21 digits on the Head ID label. But last 2 digits
mentioned small character are not reflected to EEPROM, and are just
management ID in the manufactory. Therefore, input 19 digits Head ID
only, and do not input 21 digits to prevent check sum error.
NOTE: If you mistype the Head ID, adjustment program will automatically detect
it, and indicates error message. In this case, once press "Previous"
button, and then restart from step 5.
8. Once you input the head ID, press the ink switch to install all ink cartridges and
make the printer to move to the normal stand-by condition.
9. After installing all ink cartridges and completing the ink cartridge replacement
cleaning, press "Status" button to make the adjustment program detect normal
stand-by mode. Due to this operation, you can advance to the another adjustment
options.
10. To check the typed Head ID whether it's actually registered or not registered, press
Previous button once.
11. Program screen will return to Figure 5-5.
12. Press "Check present data". You can see your once typed Head IDs on the
following screen.
Figure 5-7. "Head ID" Check Screen