Epson Stylus Photo 950, Руководство по обслуживанию

Страница: 127 / 191

EPSON Stylus PHOTO 950 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 127
[ASF Unit left side removal]
16. Remove the Torsion Spring 0.24 and the Change Lever.
Figure 4-72. ASF Unit Left Side Removal 1
17. Remove the LD Roller Shaft together with 1) the Drive LD, 2) the Clutch and 3)
the Extension Spring 0.5.
Figure 4-73. ASF Unit Left Side Removal 2
Torsion Spring 0.24
Change Lever
LD Rolled Shaft Unit
Clutch
Drive LD
Extension Spring 0.5
C A U T I O N C A U T I O N C A U T I O N
„
There is a U-type Spring at the left end of the Shaft. Set it so that
the concave part is on the inside (LD Roller side) and the convex
side is on the outside (Frame Left Side).
„
At the stage just before inserting the LD Roller Shaft, the
following parts must be installed: 1) Drive LD, 2) Clutch, 3)
Extension Spring 0.5.
1. Hang Extension Spring 0.5 to the Hook of Drive LD by using
tweezers.
2. Hang Extension Spring 0.5 to the Hook of Clutch and insert the
Shaft of Drive LD into the hole of Clutch.
Figure 4-74. ASF Unit Left Side Removal 3
Hook of Drive LD
Hook of Clutch
Hole