Epson SC-T3400 SERIES, Руководство пользователя

Страница: 114 / 192

Settings item Settings value Explanation
Platen Gap 1.2 Displayed when Custom Paper is selected in Paper Type . When
registering Custom Paper, this is the Platen Gap (distance between
print head and paper) for the paper selected in
Change Reference
Paper , so it does not normally need to be changed. Change this to
a setting that will widen the gap (a higher value) if print results are
smeared.
1.6
2.1
Top/Bottom Margins
Standard
* Setting this to Standard will set the top/bottom margins as follows
depending on the printer driver print targets.
❏
CAD/Line Drawing: 3 mm/3 mm
❏
Other: 30 mm/30 mm
Left and right margins will remain at 3 mm regardless of settings. If
there is any soiling on the top section of the print results, increase
the top margin.
U
“Printable area” on page 178
Top 3 mm/Bottom
3 mm
Top 15 mm/
Bottom 15 mm
Top 35 mm/
Bottom 15 mm
Paper Suction -4 to +3 It is important to choose the appropriate amount of suction for the
paper used in order to maintain the correct distance between the
paper and print head. Choosing too high a value for thin or soft
paper will increase the distance between the paper and print head
too much, causing print quality to decline or preventing the paper
feeding correctly. In such cases, you will need to lower the paper
suction. The lower the setting value, the weaker the suction power.
Back Tension
Auto
* If there is any wrinkling on the paper during printing, set this to
High or Extra High .
When this is set to Extra High , the following setting is enabled.
Settings - General Settings - Printer Settings - Paper Source
Settings - Roll Paper Setup - Back Tension 2
Standard
High
Extra High
Drying Time
Drying Time per Pass 0.0 to 10.0
seconds (0.0
*
)
Select the time the print head pauses to allow drying after each
pass. Choose from values between 0.0 and 10.0 seconds.
Depending on the paper type, the ink may take a while to dry. If the
ink blurs on the paper, set a longer time for drying the ink.
Increasing the drying time increases the time needed to print.
Drying Time per Page 0.0 to 60 minutes
(0.0
*
)
Specify how long the printer pauses to allow the ink to dry after
printing each page; choose from values between 0.0 and 60
minutes. Depending on the ink density or paper type, the ink may
take a while to dry. If the ink blurs on the paper, set a longer time
for drying the ink. The longer the drying time, the more time
required for printing.
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
114