F
Raise the lift lever on the right side of the printer
to lift the media into position, then firmly insert
the roll holder.
If the roll of media has the outer diameter which
is less than 140mm, lift it up by your hands, and
set it to the roll holder as described in Step 4.
G
Tighten the roll holder screw to fix the roll holder
in place.
H
Rotate the handle until part A in the illustration
below is fully inserted.
c
Important:
Once part A is hidden, do not turn the handle
any further. Failure to observe this precaution
could damage the roll holder.
I
Raise the media loading lever.
J
Pull out the media and insert it into the printer.
SC-S30600 Series User's Guide
Basic Operations
24
Содержание SC-S30600
Страница 1: ...User s Guide NPD4561 01 EN ...
