Page 18
Epson Research and Development
Vancouver Design Center
S1D13L03
S5U13L03P00C100 Evaluation Board User Manual
XB1AG001
Issue Date: 2014/05/15
Revision 1.0
4.7 GPIO Connections
The S1D13L03 Simple LCD Controller has 8 GPIO pins. All the GPIO pins are routed to
the H4 connector. Note that connector H4 is not populated on the S5U13L03P00C100
Evaluation Board.
The following figure shows the location of the GPIO connector, H4. Connector H4 is 0.1
inch x 0.1 inch” 16-pin header (8x2).
Note
Connector H4 is not mounted. Connector H4 is optional. Therefore Connector H4 is
only allocated area for mounting. Toto use this allocated are for mounting H4, it is rec-
ommended to use the header of the size mentioned above.
Figure 4-4: GPIO Connector Location (H4)
For the pinout of connector H4, see “Schematic Diagrams” on page 21.
