Page 8
Epson Research and Development
Vancouver Design Center
S1D13L03
S5U13L03P00C100 Evaluation Board User Manual
XB1AG001
Issue Date: 2014/05/15
Revision 1.0
3.2 Configuration Jumpers
The S5U13L03P00C100 Evaluation Board has 6 jumpers which configure various board
settings. And this board has 8-pin jumper for setting back-light of the LDC panel. The
jumper positions for each function are shown below.
Table 3-2:
Configuration Jumper Setting
Table 3-3: 8-PinJumper Setting
Jumper
Function
Position 1-2
Position 2-3
No Jumper
JP1
COREVDD
Normal
—
COREVDD current
measurement
JP2
PLLVDD
Normal
—
PLLVDD current
measurement
JP3
IOVDD
Normal
—
IOVDD current
measurement
JP4
IOVDD Source
H1 connector, pin 32
3.3VDD
—
JP5
PIOVDD
Normal
—
PIOVDD current
measurement
JP6
PIOVDD Source
H4 connector, pin 8
3.3VDD
—
= Required settings when using S5U13U00P00C100 USB Adapter board
Jumper
Position
Function
JP7
Position 1-2
No Jumper
In connect case, TPS61161A is Enable
Position 3-4
No Jumper
In connect case, Vout = 20mA
Position 5-6
No Jumper
In connect case, Vout = 40mA (add connect Position 3-4)
Position 7-8
No Jumper
In connect case, Vout = 60mA (add connect Position3-4 and
Position5-6)
= suggested settings
