Epson Research and Development
Page 15
Vancouver Design Center
S5U13L03P00C100 Evaluation Board User Manual
S1D13L03
Issue Date: 2014/05/15
XB1AG001
Revision 1.0
4.5.2 Connecting to the Epson S5U13U00P00C100 USB Adapter Board
The S5U13L03P00C100 Evaluation Board is designed to connect to a S5U13U00P00C100
USB Adapter Board. The USB adapter board provides a simple connection to any computer
via a USB 2.0 connection. The S5U13L03P00C100 directly connects to the USB adapter
board through connectors P1 and P2.
The USB adapter board also supplies the 3.3V power required by the S5U13L03P00C100.
IOVDD should be selected for 3.3V and JP4 should be set to the 2-3 position.
When the S5U13L03P00C100 is connected to the S5U13U00P00C100 USB Adapter
board, there are 2 LEDs on S5U13L03P00C100 which provide a quick visual status of the
USB adapter. HB (D300) blinks to indicate that the USB adapter board is active. ENUM
(D301)turns on to indicate that the USB has been enumerated by the PC.
The following diagram shows the location of connectors P1 and P2. P1 and P2 are 2mm x
2mm, 40-pin headers (20x2).
Figure 4-2: USB Adapter Connector Locations (P1 and P2)
