Preparation of Demo
S5U13781R00C100 Demonstration Manual
Seiko Epson Corporation
11
(Rev. 2.1)
(2) Preparation for writing data into flash memory
1.
Unzip the file “flash_psp1.zip“ described in the Table 2-1,
ATM0430D5 Download File
. The
project folder “flash_psp” is created.
2.
Unzip the MPSSE-SPI library “libMPSSE-SPI.zip” downloaded in Section 2.1, Instruction for
Tool Download and Install. The folder “libMPSSE-SPI” will be created.
3.
Double click the “b.bat” icon in the folder “\libMPSSE-SPI\Release-SPI\samples”.
A command window is opened. Type “3” to select “SPI-Static”.
Copy following three files from the folder “\libMPSSE-SPI\Release-SPI\samples\SPI” into the
project folder: “flash_psp”.
ftd2xx.h
libMPSSE.a
libMPSSE_spi.h
This completes embedding the MPSSE-SPI library into the M25P16 write project folder:
“flash_psp”.
Figure 2-2 Structure of the Project Folder (Flash)
Project folder: flash_psp
Contents
├
ReadMe.txt
├
EPSON_LCDC_REF.sln
Solution file
├
***.cpp
Source file
├
***.h
Header file
├
libMPSSE.a
MPSSE library from FTDI
├
libMPSSE.h
MPSSE header file from FTDI
├
ftd2xx.h
D2XX header file from FTDI
├
pix
Directory for demo image data
…
├
image*_480x272.ppm
Demo image data for PSP panel (in PPM format)
…
├
image*_320x240.ppm
Demo image data for QVGA panel (in PPM format)
…
Contents provided by Epson are written in Italic letter.