Introduction
6
Seiko Epson Corporation
S5U13781R00C100 Demonstration Manual
(Rev. 2.1)
1.3 Required Materials for Demonstration System
■ Hardware
Following components are required to establish the demonstration system.
1. S5U13781R00C100 (LCDC reference board from Epson)
2. STM32 F4-Discovery (CPU evaluation board from STMicroelectronics)
3. ATM0430D5
(4.3 inch, 480x272 dots, 24 bit full color TFT LCD panel from XIAMEN ZETTLER)
4. UM232H (USB-Serial conversion board from FTDI)
5. AC power supply ( e.g. General purpose DC5V2A output, 100V – 240V input, inner diameter 2.1mm)
6. AC power supply ( e.g. General purpose DC3.3V2A output, 100V – 240V input, inner diameter
2.1mm)
7. DC jack (e.g. General purpose inner diameter 2.1mm)
8. Pin header (e.g. General purpose 2x25 2.54mm pitch)
9. Jumper pin (e.g. General purpose 2.54mm pitch)
10. USB cable A female – mini-B male (General purpose A to mini-B)
11. Personal computer
For programming of STM32 F4-Discovery and UM232H control.
Required software is available on the internet.
Demonstrations explained in this manual are confirmed operating on a personal computer configured
as follows.
OS: Microsoft Windows 7 Professional Service Pack 1
CPU: Intel(R) Core(TM) i5-2520M [email protected]
On board memory: 4GB
Capacity of hard disk: 162GB capacity of C: drive. (Disk space required for the software tools is
less than 5GB.)
■ Software (Demo)
The sample software package (includes image data for demo and configuration information for LCD) is
available on the Epson web site.
