manualshive.com logo in svg

Epson S1C62 Family, Справочное руководство

Семейство Epson S1C62 представляет собой коллекцию микроконтроллеров с широким набором функций. Для ознакомления с возможностями устройства, вы можете бесплатно загрузить полное руководство по эксплуатации с нашего веб-сайта. Актуальную версию руководства можно загружать с manualshive.com.

Поделиться
Скачать
background image

CROSS ASSEMBLER ASM62XX

S1C62 FAMILY

EPSON

III-3

DEVELOPMENT TOOL REFERENCE MANUAL

3 ASM62XX  OPERATION  PROCEDURE

This section explains how to operate ASM62XX.

3.1 Starting ASM62XX

When starting ASM62XX, enter the following at DOS command level (when a prompt such as A> is being
displayed):

ASM62XX _ [drive-name:] source-file-name [.shp] _ [-N]

 

_ indicates a blank.
A parameter enclosed by [ ]
can be omitted.

 indicates the return key.

When starting ASM62XX through the DMS6200, selects the "ASM62XX.EXE" and source file in the menu
screen, and input options necessary.

■

Drive name

If the source file is not on the same disk as ASM62XX.EXE, specify a disk drive mounted the floppy disk
storing the source file before input the source file name.  If the source file is on the same disk as
ASM62XX.EXE, it does not need to specify the disk drive.

■

Source file name

This is the name of the source file to be entered for ASM62XX.  The source file name must not exceed
seven characters in length.  File extension .DAT must not be entered.

■

.shp

Characters s, h, and p are options for specifying the file I/O drives, and can be omitted.

s:

Specifies the drive from which the source file is to be input.  A character from A to P can be
specified.  If @ is specified, the source file in the current drive (directory) is input.  Even if a drive
name is prefixed to the source file name, this option is effective.

h:

Specifies the drive to which the object file (HEX) is to be output.  A character from A to P can be
specified.  If @ is specified, the object file is output to the current drive (directory).  If Z is
specified, only assembly is executed; the object file is not generated.

p:

Specifies the drive to which the assembly listing file is to be output.  A character from A to P can
be specified.  If @ is specified, the object file is output to the current drive (directory).  If X is
specified, a listing containing error messages is output to the console.  If Z is specified, the
assembly listing file is not generated.

Characters s, h, p must all be specified; only one or two of them is not sufficient.

■

-N option

The code (FFH) in the undefined area of program memory is not created.

Note

The program data to be provided does not use the "-N" option. The FFH data should be inserted into
the undefined program area.

Содержание S1C62 Family




























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S1C62 Family

Commell LS-570 User Manual preview
LS-570
Бренд: Commell Страницы: 58
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Бренд: Dentsply Sirona Страницы: 91
Behringer EXPANSION CARD X-DANTE Quick Start Manual preview
EXPANSION CARD X-DANTE
Бренд: Behringer Страницы: 65
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Бренд: KEMP Technologies Страницы: 71
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Бренд: Eaton Страницы: 114
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Бренд: Cypress Semiconductor Страницы: 10
UNA AUTOMATION DIFRA Installation Manual preview
DIFRA
Бренд: UNA AUTOMATION Страницы: 20
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Бренд: IndigoVision Страницы: 38
ZyXEL Communications PK5000Z How To Configure preview
PK5000Z
Бренд: ZyXEL Communications Страницы: 3
Harman BSS DCP-555 Installation Manual preview
BSS DCP-555
Бренд: Harman Страницы: 24
National Instruments PCI-6601 User Manual preview
PCI-6601
Бренд: National Instruments Страницы: 52
Multiplex MULTIflight Stick Operating Instructions Manual preview
MULTIflight Stick
Бренд: Multiplex Страницы: 10
ST STA309A Operation Manual preview
STA309A
Бренд: ST Страницы: 67
WTI NPS-16HD20-1 User Manual preview
NPS-16HD20-1
Бренд: WTI Страницы: 178
c SwiftreaderX Installation Manual preview
SwiftreaderX
Бренд: c Страницы: 32
National Datacomm 9210S01 User Manual preview
9210S01
Бренд: National Datacomm Страницы: 62
ARX LSP-1 Owner'S Manual preview
LSP-1
Бренд: ARX Страницы: 4
Whirlwind PYROBOX Technical Specifications preview
PYROBOX
Бренд: Whirlwind Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды